Dusting off Dreamcast Linux

Yes, here at Old VCR we live in the past, when RISC Unix workstations still ruled the earth like large boxy tentaculous Cthulhus. Oh, sure, if you wanted a modern equivalent you could just buy a Raptor POWER9 like the one I'm typing on now. But around here even PowerPC is too pedestrian of an architecture. We need something unique.

That's more like it! A keyboard, mouse, a NIC, VGA output, 16MB of RAM and a whole gig (you wish) of read-only optical drive space with a 200MHz Hitachi SuperH SH-4 CPU faulting its paltry 8K of I-cache and 16K of D-cache non-stop. Now freshly refurbished, its cooling fan runs louder than my Power Mac Quad G5 at idle and the drive makes more disk seeking noise than when I can't find a lost floppy. And since the buzzword with Linux distros today is immutability, what could be more immutable than an ephemeral, desperately undersized RAM disk overlaid on a live CD?

xa 2.3.14, the 6502/65816 cross-assembler

xa (xa65) 2.3, the current minor release of this long-lived 6502 and 65816 cross-assembler, gets one more stay of execution to 2.3.14 in order to fix a segfault for recursive macros with smaller arities and a regression from 2.3.13 with nested comments (though André and I may consider whether we will still support this in 2.4). The testsuite is naturally expanded and tuned up a little bit, too, and as always run to completion on the multiple current and geriatric systems here at Floodgap. I know I'm sounding like a broken record but 2.4 is coming and we will be breaking some edge-case compatibility and cutting out some long-deprecated corners of the code, so it was important to ensure 2.3.x was tuned up as much as possible before putting it out to pasture. There is no corresponding new release for dxa, the companion disassembler; work is still being done there.

The new release and archived old versions are updated on xa's home page. Both xa and dxa are available under the GNU Public License v2.

Instruction fusion and a real serial port for your virtual KIM-1: The Incredible KIMplement 0.3

Everyone should have the retrocomputing experience of a 1976 1MHz MOS 6502 single-board computer with 1K of memory, six hex digit LEDs and a keypad. One of the earliest such systems and one of the least expensive, you program the KIM-1 in 6502 assembly language right on the keypad in hexadecimal and it's amazing what you could do with a system that little. You could even hook up a cassette deck and an external terminal and have a full system for just a few hundred dollars; MOS Technology (and later Commodore) consequently sold a ton of them. We first experienced the KIM-1 in high school and having grown up with Commodore 64s and 128s it was like meeting their long-lost little brother. We spent the whole weekend typing in hex opcodes and learned how to bang on the hardware and make it do surprising things in a space that small. That's the very unit in the picture, still in my possession, and over four and a half decades old it still works.

While I now personally own four KIMs (an MOS Revision A, plus a Commodore Revision D, a Commodore Revision G and this Commodore Revision F, my first), it's naturally more convenient to develop on an emulator and then test on the real thing. The KIM is such an easy system to understand that there are other KIM-1 emulators like it, but this one is mine. And the Incredible KIMplement runs on a Commodore 64, so anyone can run it on just about anything that can emulate a Commodore 64, or even a real Commodore 64.

However, I also think the KIMplement is a darn handy emulator if I do say so my darn self. It naturally supports the keypad and hex LEDs, and loads and saves memory like every other basic KIM-1 emulator, but it also supports a virtual teletype on the Commodore 64's console (the MAME driver still can't do that) and implements a true KIM-4 expander with 16K of total addressing space.

But new in this version, and the only emulator that currently supports it so far, is you can now redirect the virtual KIM's TTY to the Commodore 64 user port as a real physical serial connection: a physical serial port for your virtual KIM-1. The picture shows a real Commodore 128D running the emulator, connected to minicom on my Linux workstation over USB serial from the 128's userport at 300 baud. From the Linux machine's perspective it's practically indistinguishable from my real Revision F unit, and on Commodore 64 emulators that support it (like VICE), you can tunnel the emulated 64's user port over a TCP socket to give your virtual KIM an Internet connection — we'll demonstrate that below. Plus, this means your virtual KIM can now call out to the real world as well as in! (What can you do with that? Stay tuned for a future entry!)